Size |
Part 1 |
Part 2 |
|
|
|
|
D1 |
d1 |
l1 |
D2 |
d2 |
l2 |
da |
u |
s |
|
Pre. mm |
max. mm |
mm |
mm |
Pre. mm |
max. mm |
mm |
mm |
mm |
mm |
mm |
19 |
- |
19 |
32 |
25 |
17 |
24 |
39.5 |
25 |
40 |
5 |
16 |
24 |
- |
24 |
40 |
30 |
22 |
28 |
48 |
30 |
55 |
6 |
18 |
28 |
- |
28 |
48 |
35 |
26 |
38 |
64.5 |
35 |
65 |
7 |
20 |
38 |
10 |
38 |
66 |
45 |
36 |
45 |
78 |
45 |
80 |
8 |
24 |
42 |
12 |
42 |
75 |
50 |
40 |
55 |
94 |
50 |
95 |
10 |
26 |
48 |
13 |
48 |
85 |
56 |
46 |
60 |
104 |
56 |
105 |
11 |
28 |
55 |
18 |
55 |
98 |
65 |
53 |
70 |
118 |
65 |
120 |
13 |
30 |
65 |
20 |
65 |
115 |
75 |
63 |
75 |
134 |
75 |
135 |
14 |
35 |
75 |
28 |
75 |
135 |
85 |
73 |
90 |
158 |
85 |
160 |
16 |
40 |
90 |
38 |
90 |
160 |
100 |
88 |
100 |
180 |
100 |
200 |
19 |
45 |
Size |
Weight / kg |
Moments of inertia kgm2 |
|
Part 1 |
Part 2 |
Part 1 |
Part 2 |
19 |
0.16 |
0.21 |
0.00003 |
0.00005 |
24 |
0.40 |
0.40 |
0.00011 |
0.00015 |
28 |
0.52 |
0.76 |
0.00024 |
0.00049 |
38 |
1.1 |
1.4 |
0.00087 |
0.0013 |
42 |
1.7 |
2.3 |
0.0018 |
0.0031 |
48 |
2.8 |
3.1 |
0.0031 |
0.0052 |
55 |
3.7 |
4.6 |
0.062 |
0.010 |
65 |
5.7 |
7.0 |
0.013 |
0.019 |
75 |
8.8 |
11 |
0.027 |
0.041 |
90 |
15 |
15 |
0.068 |
0.090 |
> Drill holes H7 with keyway in accordance with DIN 6885/1; tolerance zone JS9 and set screws on the keyway; weight and moments of inertia valid for medium bore diameters
> Coupling half materials: EN-GJL-250 (GG-25) in accordance with DIN EN 1561
> Possible combination: 1/1, 1/2, 2/2
> Can also be combined with type HWT
Технические характеристики
Size |
Max. rotation speed rpm |
Torque Nm |
Torque Nm |
|
|
nominal TKN |
max. Tkmax |
changing TKW |
nominal TKN |
max. Tkmax |
changing TKW |
|
|
92° Shore A color white |
98° Shore A color red |
19 |
19 000 |
10 |
20 |
2.6 |
17 |
34 |
4.4 |
24 |
14 000 |
35 |
70 |
9 |
60 |
120 |
16 |
28 |
11 800 |
95 |
190 |
25 |
160 |
320 |
42 |
38 |
9500 |
190 |
380 |
49 |
325 |
650 |
85 |
42 |
8000 |
265 |
530 |
69 |
450 |
900 |
117 |
48 |
7100 |
310 |
620 |
81 |
525 |
1050 |
137 |
55 |
6300 |
410 |
820 |
105 |
685 |
1370 |
178 |
65 |
5600 |
625 |
1250 |
163 |
940 |
1880 |
245 |
75 |
4750 |
1280 |
2560 |
333 |
1920 |
3840 |
499 |
90 |
3750 |
2400 |
4800 |
624 |
3600 |
7200 |
936 |
> Torques for shaft fit with keyway
Size∆ |
Max. shaft misalignment2) |
|
radial1) ∆Kr / mm |
axial1) ∆Ka / mm |
angular1) ∆Kw / Grad |
19 |
0.20 |
1.2 |
1.2 |
24 |
0.22 |
1.4 |
0.9 |
28 |
0.25 |
1.5 |
0.9 |
38 |
0.28 |
1.8 |
1.0 |
42 |
0.32 |
2.0 |
1.0 |
48 |
0.36 |
2.1 |
1.1 |
55 |
0.38 |
2.2 |
1.1 |
65 |
0.42 |
2.6 |
1.2 |
75 |
0.48 |
3.0 |
1.2 |
90 |
0.50 |
3.4 |
1.2 |
1) The values mentioned are valid for 1.500 rpm and may occur only separately. At multiple misalignments or higher speeds the values must be reduced (see page 7).
2) The values mentioned are valid for an ambient temperature of 30 °C. At higher temperatures the values must be reduced.